
GripBits is just what it says, Bits for Grips. High quality Grip equipment designed to meet the needs of the industries leading grips.
GripBits equipment is made to the highest standards and with the best material and components that are available.
HEAVY DUTY VACUUM UNIT

We are very pleased to announce the availability of the Heavy Duty Vacuum pump.
It is an industrial grade pump capable of shifting over 80 litres of air per minute. This means you are able to build bigger rigs and maintain the vacuum in them. In smaller rigs the draw down time is much quicker.
As an example two BigFoot plates are drawn down and set in less than 10 seconds.
There is a 6mm Hard anodised cheeseplate fitted as standard to the pump to make rigging it a bit easier.
All the holes are on 1 inch spacing and some are tapped 3/8x16 and 1/4x20 UNC.
Metric threads are available but are not a stock item.
Introducing BigFoot


A completely new style and approach to both cheeseplates and vacuum feet. BigFoot is mounted as close as possible to the vacuum foot to reduce the center of gravity and also to allow you to mount your equipment as low down as possible. BigFoot is mounted on the legendary Wood's Powergrip vacuum pad, well known as a tough and resilient operator. The push fit vacuum fitting is designed to work with any 6mm vacuum system, adding a big chunk of versatility to your kit. GripBits equipment can be custom engraved with your logo.
Grip Bits G0750 10” Suction
This is range of low profile cheeseplates mounted on 4 different Wood's Pwrgrip vacuum pads. The holes on the larger plates are tapped 3/8 x 16 UNC and on the smallest 1/4 x 20 UNC. GripBits vacuum feet are a heavy duty selection of vacuum accessories designed to enhance any 6mm system and give you that bit more holding force when you need it. Stainless steel push fit vacuum fitting is compatible with any 6mm system. The feet are supplied with covers to protect them from dust and debris.


Grip Bits TL6 6” Suction

This is range of low profile cheeseplates mounted on 4 different Wood's Pwrgrip vacuum pads. The holes on the larger plates are tapped 3/8 x 16 UNC and on the smallest 1/4 x 20 UNC. GripBits vacuum feet are a heavy duty selection of vacuum accessories designed to enhance any 6mm system and give you that bit more holding force when you need it. Stainless steel push fit vacuum fitting is compatible with any 6mm system. The feet are supplied with covers to protect them from dust and debris.
Grip Bits LJ45 4 1/2” Suction
This is range of low profile cheeseplates mounted on 4 different Wood's Pwrgrip vacuum pads. The holes on the larger plates are tapped 3/8 x 16 UNC and on the smallest 1/4 x 20 UNC. GripBits vacuum feet are a heavy duty selection of vacuum accessories designed to enhance any 6mm system and give you that bit more holding force when you need it. Stainless steel push fit vacuum fitting is compatible with any 6mm system. The feet are supplied with covers to protect them from dust and debris.

Grip Bits TL3 3” Suction

This is range of low profile cheeseplates mounted on 4 different Wood's Pwrgrip vacuum pads. The holes on the larger plates are tapped 3/8 x 16 UNC and on the smallest 1/4 x 20 UNC. GripBits vacuum feet are a heavy duty selection of vacuum accessories designed to enhance any 6mm system and give you that bit more holding force when you need it. Stainless steel push fit vacuum fitting is compatible with any 6mm system. The feet are supplied with covers to protect them from dust and debris.